High Performance Extraction Machines for the Professional Carpet and Upholstery Cleaner

The new extraction machines from CEBE®, the BENOVAC KR series, set a new standard in high-performance extraction machines for the professional carpet and upholstery cleaner.

The housing is made of robust polyform mould, the wheels have a large diameter in the back for easy stair climbing and are free rotating in the front for easy maneuverability. The front wheels also have brakes for added safety. However, what really sets these machines apart from others is the fact that they are CE certified on the one hand and that they have a reduced noise level on the other. This means that the operator does not have to wear ear protection (even based on the new EU directive), even though it is recommendabl when working on a full-time basis. An additional advantage is the parallel configuration of the vacuum motors - this means that one does not pull along the other, as is the case with the standard series configuration. So if you want to use only one vacuum motor (e.g. when cleaning sensitive textiles) you get 100% of the turbine that is in operation. The performance is optimized and the wear on the motor reduced! The H-models have a two-stage in-line heater (each stage has 1000 Watts). With the Pre-Heat valve the operator is able to pre-heat the water in the solution tank in order to raise the cleaning temperature even more. If the carpet or textile is suitable for high heat the cleaning result is improved, the activity of enzymes contained in some of our products is elevated and the drying time is reduced.

The models KR2000 and KR 2000H have a 20 bar pump. The pressure of this pump is adjustable using the valve and manometer located at the bottom back of the machine. Thus sensitive textiles can be treated with a low pressure spray and durable carpets with high pressure. In order to remove the liquid sprayed into the carpet or textile both models have two 3-stage vacuum motors which enable the operator to remove a maximum of dirt and moisture.

Attached above the drain valve is a suction attachment which enables one to prime a run-dry pump or empty both hose and pump of liquid after operation to protect from freezing.

The lid for the solution tank is solid polyform and attached with two hinges, making it easy to open and close yet durable. The vacuum tank is easy to open - simply twist the lid 90 degrees and take off!

For maintenance purposes the machines are easily opened - just unhinge both latches and lift the top. All models save the KR1000 have two electrical cables for two circuits in the machine, as the power consumption may overstrain one circuit with power ratings up to 3000W and more. However using an initial power surge limiter one can use all machines with just one electrical circuit (with exceptions) under normal circumstances, as most power is consumed when the machine is started up. Of course it is always recommended to use two circuits, if available.

Each machine comes with a standard hose package and a 2-jet floor tool. The instruction manual supplied with each machine contains detailed drawings and parts lists for all available spare parts, as well as electrical diagrams for repair purposes. To get back to the page Machines, Accessories and Spare Parts click here. To download the brochure click here.